DIY Lipstick Mold with Lipstick Stripper, 12.1mm 4 Holes Aluminum Alloy Lip Gloss Balm Fill Maker Molding Tool for DIY Cosmetic Lipstick(1)
Price: $42.84
(as of Apr 23, 2022 07:17:18 UTC – Details)
Specification:
Condition: 100% Brand New
Item Type: DIY Lipstick Mold
Material: Aluminium Alloy
Use: It is used for making lipstick
Holes: 4 Holes Dual Use
Inner Diameter: Approx. 12.1mm / 0.5in
Shape: Standard, Two Colors
Color: Rose Gold, Space Silver (optional)
The Correct Lipstick Production Process:
1. Combine the upper and lower part of the mold.
2. Heat the material in proportion to complete dissolution.
3. Pour the lipstick liquid into the mold hole, let stand for more than 30 minutes, you can put it in the refrigerator and the cooling effect is better (20 minutes).
4. After the lipstick becomes solid, clean the spilled lipstick, then gently remove the upper cover to ensure that the lipstick strip is removed from the lower mold without following the cover. (If the lipstick is not easily released from the mold, use a removal tool or other tool to gently press it.)
5. Rotate the lipstick tube to the top, press it against the lipstick strip, press it to the bottom and touch the mold and pull it up in parallel.
Moisturizing Lipstick Production:
4 grams of beeswax, 12 grams of olive oil, 1.25 grams of toner, vitamin E and so on. The ratio of the basic wax oil is controlled at 1:3. If it is not easy to demould, please replace the beeswax.
Special Note: When making, you must master the temperature, dosage and pre- and post-program. If the temperature is too low, it will produce horizontal stripes. If the temperature is too high, it may cause foaming, cracks or small holes. When making two-color lipstick, you need to pay attention to it.
Tip: When the weather is hot, if you make the lipstick at room temperature, it will be affected when demoulding. It is recommended to place it in the refrigerator for cooling.
Package List:
1 x Lipstick Mold
2 x Screw
1 x Hex Wrench
Parcel Dimensions : 13.46 x 10.16 x 4.32 cm; 260 Grams
Date First Available : Sept. 23 2019
ASIN : B07Y8G96T6
HIGH QUALITY MATERIAL : Precision CNC processing makes the contact parts tighter to ensure the lipstick shape is more beautiful. Each corner of the lipstick mold is carefully treated, easy to operate and more convenient to use.
EASY TO CLEAN: The surface of the residual red stains only need a paper towel to wipe clean. Anodized and scratch resistant, environmentally friendly and non-toxic, wear resistant and corrosion resistant.
CLEANING STEP: Disassemble the mold, soak it with vegetable oil or kerosene for a day, then clean it with a soft cleaning solution and dry it for installation! If there are still black blocks during use, re-clean or use the test lipstick for a few more times until there are no black blocks.
NOTE: After use, wipe and seal with vegetable oil. Try to avoid washing many times. Place it in a dry and ventilated place. It can be oiled and maintained. It should not be boiled. Do not cook in a pan. Do not heat sterilization.
